Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FAULTS
SYMPTOM
Burner extinguishes
after igniting.
Ceramic glass plate
broken.
EN 8
POSSIBLE CAUSE
The control knob has not
been pressed long and/
or deep enough (at least
3 seconds).
Thermocouple (2) is dirty.
Object fallen onto it.
SOLUTION
Keep the control knob fully pressed for
at least 3 seconds between high and low
settings. This can take longer the first time
because of the gas supply.
Clean/dry thermocouple.
Close the gas main switch and pull the plug
out of the socket. Contact the your installer.
Please note! Do not throw a broken
ceramic glass plate in the glass recycling
bin but take this to the Municipality's
waste recycling centre.
Publicité
Table des Matières
