Remote Control Handset - patura 151001 Mode D'emploi

Remote Control Handset

The Remote Control with Fence
Compass handset has 3 functions:
• Voltage / current meter
– provides instant feedback on
fence performance (voltage and
current)
• Fault finder – helps finding a fault
anywhere on the fence
• Remote control - turns a remote
controlled energizer on or off
from anywhere on fence system
Parts of the Remote Control with
Fence Compass handset (see to
the right)
Configuring for use with a PATURA remote-controlled energizer
If you buy an additional or replacement handset for a PATURA remote-controlled energizer
originally supplied with a handset or a system already operating with a handset, you will need
to configure the new handset to communicate with the energizer by matching it to the energiz-
er's address setting.
If you buy a handset and a PATURA remote-controlled energizer separately and the energizer
has never been used with a handset before, you will need to activate the remote function of the
energizer.
If you are having problems with your handset interfering with a neighbour's energizer, or you
are having interference problems with your own energizer, you may need to change the ener-
gizer's address setting.
Configuring a handset to communicate with a Remote System Energizer
Follow these instructions if you have purchased a replacement or an additional handset for use
with a Remote System energizer (an energizer that is already set up to obey commands from a
handset)
Identify the energizer's address setting
When first connected to the power source, all light segments on the energizer's LED display
illuminate. They then illuminate separately from left to right and back again. This indicates that
the energizer is opera t ing normally. The LED display then displays a light sequence, for three
- 18 -