Samsung RF28 Série Guide D'utilisation page 29

Masquer les pouces Voir aussi pour RF28 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To reattach the freezer drawer
Once the refrigerator is in or near its final location, re-attach the freezer drawer by
following the directions in the reverse order of removal.
STEP 4 Leveling the refrigerator
CAUTION
• When installed, the refrigerator must be leveled on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Leveling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear.
Level the refrigerator using the special screws (levelers) on the front legs. Use a flat-head
screwdriver to turn the levelers.
Untitled-3 29
• To adjust the height of the left side:
Insert a flat-head screwdriver into the
leveler of the left side front leg. Turn
the leveler clockwise to raise the left
side or turn it counterclockwise to
lower.
• To adjust the height of the right side:
Insert a flat-head screwdriver into the
leveler of the right side front leg. Turn
the leveler clockwise to raise the right
side or turn it counterclockwise to
lower.
English 29
2019-05-15
4:09:32

Publicité

Table des Matières
loading

Table des Matières