Specifications
Sender
Audio Input: Stereo, speaker-level
Audio Output: Wireless
Supply voltage
Transition Delay
Receiver
Audio Input: Wireless
Audio Output: High Efficiency Class D,
Speaker-level
High Efficiency Class D Output
Transition Delay
Power Supply
Power Consumption
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
16
• Maximum audio input signal: 10 V RMS into
6.6 Kohms
• Stereo, 16-bit, 48 KHz uncompressed
• Bit-rate: 1.465 Mbps
• Raw wireless bit-rate: 2 Mbps
• 5V
• 15-20 ms
• Stereo, 16-bit, 48 KHz, uncompressed
• Wireless audio system performance
• Signal-to-Noise Ratio: 87 dB
• Total harmonic distortion: 0.4% (at 1 KHz, Output
2 V RMS
• Supports 4 to 16 ohm speakers
• Audio output power: 2 × 25 W (RMS) into 4 ohms
(no more than 10% THD)
• 15-20 ms
• AC 120 V ~ 60 Hz
• 15 W