Publicité
Assembly instructions | Care information
• Observe the local building regulations and the snow load zones in your region.
• Before the assembly sort the parts and check the contents list according to the assembly
instructions.
• At least 2 persons are required to assemble the carport kit.
• Follow the instructions and installation steps in the assembly instructions.
• The Twin-Wall Sheets do not walk on transverse running boards (at least 2 rafters).
• Point loads must be avoided absolutely
• Regularly remove snow from the roof
• Snow load 150 kg/m²It makes sense to install a snow guard above the carport.
• Keep the gutter free of leaves, dirt and snow.
• The carport kit must be installed on a flat, solid surface (for example concrete, concrete slabs).
• Clean the Twin-Wall Sheets with water and a mild detergent and do not use abrasives, acetone
or solvents!
• Defective or bent posts or beams must be replaced immediately.
Colour and size deviations etc. within the usual tolerances reserved. Our recommendations do not
release the customer from the obligation to check the product on his own responsibility. In case of
doubt, please consult a specialist. Subject to technical
13, 19
Size 4+5
TX25
Publicité
