Hendi 233962 Mode D'emploi page 7

Cleaning and Maintenance
Attention: Always unplug the appliance and open
the glass sliding door to allow it cool down com-
pletely before cleaning.
• Clean the appliance regularly and any food resi-
dues removed.
• CAUTION! Never use any abrasive or hard objects
for leaning.
Parts
All accessories such as water
bowl, shelves, shelf holders, etc.
External glass surfaces
Interior glass surfaces
Glass door
Storage
• Always make sure the appliance has already
been disconnected from the electrical power out-
let and cool down completely.
Troubleshooting
If the appliance does function properly, please
check the below table for the solution. If you are
Problems
After connected to the electrical
power supply, the appliance does
not heat up
Neither the lamp indicator nor the
heating elements heat up
• The exterior and interior surfaces can be cleaned
with a damp cloth and a little detergent.
• Shelves can be removed and washed in water.
• Do not use water jet or steam cleaner for clean-
ing and do not push under the water.
• No any parts can be cleaned in the dishwasher.
How to clean
• Soak in warm, soapy water for
about 10 to 20 minutes.
• Rinse under running water thor-
oughly.
• Wipe clean with a soft cloth and
a little mild detergent. Make
sure no water or moisture en-
ters inside the of the appliance.
• Remove any food deposits.
• Wipe clean with a soft cloth and
a little mild detergent. Make
sure no water or moisture en-
ters inside the of the appliance.
• Store the appliance in a cool, clean place.
still unable to solve the problem, please contact the
supplier/service provider.
Possible cause
• Thermal cut-out activated
• Heating element is burned out.
• The power plug is not connect-
ed firmly and correctly with the
electrical power outlet
Remark
Dry all parts well at last.
Possible solution
Contact with the supplier/service
provider for repair.
Check the connection and make
sure all the connections are cor-
rectly connected.
EN
7