Hendi 233962 Mode D'emploi page 6

Preparation before using for the first time
• Remove all protective packaging and wrapping.
• Check for the completeness of the product (water
bowl x1, screws x2, detachable power cord). In
case of incomplete delivery and damages. Please
contact supplier (See == > Warranty)
• Place all the shelves inside the appliance.
• The water bowl is installed inside the device and
then fill the water bowl with water.
• Put the foods in appropriate containers before
playing them inside the hot display and shut is by
Operation
1). Preparation
• Open the plexiglass door using the door handle.
• Put the food in the suitable container before plac-
ing it inside the appliance. Place it on the shelves
and close the plexiglass.
• Ensure there is enough spacing between the food
for the heat to be evenly distributed.
• Add some water into the water bowl inside the
cabinet.
• Connect the appliance inlet of the detachable
power cord to the appliance first, then connect
EN
power plug to a suitable electrical power outlet.
2). Start heating
• Switch ON the appliance by pressing the On/off
switch.
• Adjust the temperature setting knob (Range 30°C
to 90°C) to the desired temperature.
• The food is kept warm with the desired tempera-
ture that previously set.
• Caution! Risk of burns! Always open the door us-
ing the door handle.
6
using the sliding door
• Switch ON the appliance. Set the temperature
as required for respective foods. The adjustable
temperature range is between 30°C-90°C.
• Unplug the appliance and allow appliance to cool
down completely and clean it afterwards.
(See == > Cleaning and Maintenance).
Note:
• Do not overload the shelves to avoid any damage.
Max. loading is about 10 kg.
• Do not use the shelves for storage and process-
ing of acidic, alkaline or salty food.
• There is a cover lid for protection of power cord
inlet. There are 2 screws included for fixing the
cover lid.
• Some of the parts may become very hot. Wear
gloves (not supplied) to remove the food. And do
not touch the metal shelves.
• When not in use, set the temperature setting
knob to 0°C, switch OFF the power switch.
• Unplug the appliance from the electrical power
outlet.
• Allow the appliance to cool down completely be-
fore cleaning or storage.