Description Of The Device; Important Parts - WOLFF 069864 Traduction Du Mode D'emploi Original

Translation of the original manual
Railcut
It is essential that these instructions are read and adhered to before use
Scope of delivery:
Railcut
10 Trapezoid blades
Anti-glide rail 1.4 m
Operating instructions
(3)
(4)
(5)
(7)
Attention – risk of injury!
Retract the blade back into the housing
after completing work.
Railcut #069864 03/2013

1.0 Description of the device

1.1 Device description
(8) (2)
(1)

1.2 Important parts

(9)
(6)
2.0 Adjusting the Railcut
2.1 Inserting and replacing the blades
(6)
The Railcut was designed for the following tasks:
For a perfect double-seam cut on soft, elastic materials
made from rubber, vinyl and textile fleece materials.
The Railcut can also be used as a strip or edge
cutter, e.g. on designer materials.
The device is suitable for left and right handed
operation.
(1) Clamping plate
(2) Blade holder
(3) Fixing bracket
(4) Guide bar 1.4 m
(5) Trapezoid blade
(6) Depth adjustment, blade
(7) Guide slot
(8) Adjustment, fixing bracket
(9) Base plate
The Railcut is delivered with blades installed and is
ready for immediate use.
The Railcut is suitable for left and right handed
operation. The blades can be inserted accordingly.
Loosen bolts (6)
Remove carriage
Change blades
Re-assemble in reverse order.
English
#069864
4