Live View / Snapshot / Recording - Extel O OUT HD Guide D'installation Et D'utilisation

Note:
After you have entered the default password, the APP will remind you to change the default password.
4. Click SAVE to complete the camera settings. The system confi rms the user identity and grants permission to
user access.
5. You can refer to "ADD CAMERA" section for detail on adding additional camera(s).
In most cases, you can successfully add the camera according to the steps above. However, the camera will not
fi nd the network if Wi-Fi router turns off the SSID broadcasting function. Please enable the SSID broadcasting
to complete the settings.
Note:
Most Wi-Fi routers broadcast the Service Set Identifi er (SSID) by default. This is the name of your wireless
network, and SSID broadcasting is how Wi-Fi-enabled devices fi nd networks.
The camera will only accept SSID composed with English alphabet characters and Arabic numbers. Non-
English and special characters (!@#$%, etc.) will not be accepted.

5. LIVE VIEW / SNAPSHOT / RECORDING

The APP allows users to have access to live video. User can take snapshot image(s) and record the live video.
When you launch the App on the smart phone or tablet, the image displaying on the main screen is the very last
automatically captured snapshot from the live view of the previous established session. Tap the image to enter
live view mode.
GB7
Tap to take snapshot image(s) of the video. The
captured snapshots will be stored in your mobile
device.
Tap to turn ON/OFF the volume.
Tap to Start/Stop recording. The recorded video fi le
will be stored in the memory card of your camera.
Tap to return to the main page
CFI EXTEL O'OUT HD - 10/2015