Cleaning & Maintenance - Serene House Torch Mode D'emploi

Operating Instructions
• Please remove all packaging before use.
1
Peel away the color film seal only on
the Serene Pod ® . Do not remove the
transparent micro perforated film on
the inner layer.
3
Plug the unit into a power outlet.
Caution:
®
1. Only Serene Pod from SERENE HOUSE can be used with this product; do not heat liquids or
other objects in the heating plate.
2. Serene Pod ® can be heated repeatedly. If the scent fades or the diffusing performance drops,
please consider replacing the Serene Pod
contact your local distributor for purchase.
3. Do not move or touch when this product is in use. Allow the wax inside Serene Pod
thoroughly into a solid form before handling the device or Serene Pod
4. Please switch off the power when the product is not in use.
6
2
Properly place the
Serene Pod ®
inside the heating
plate and close
the cover securely.
4
Press the power switch in to turn on
the power.
® . The Serene Pod ® is a consumable item; please
® to cool
®
.
Cleaning & Maintenance
• Always unplug the product from its power source prior to cleaning & maintenance.
• Never soak or wash this product directly as it may cause mechanical malfunction
or danger.
• Never use acidic cleansing agents as it may cause malfunction to the product.
• Please perform cleaning & maintenance at least once a week; failing to do so
may cause the product to malfunction. Please maintain it on a regular basis.
• Allow to dry thoroughly before use.
1
Press the power
switch out to turn
off the power.
3
Open the
protective cover
and remove the
Serene Pod ® from
the heating plate.
2
Unplug this product from the
power outlet.
4
Please use a cloth to
clean the heating
plate, power indicator
light and main unit
after use. Place the
Serene Pod ® back
onto the heating plate
and tighten the top
cover back onto the
device. This completes
the cleaning and
maintenance process.
7