Chronograph Reset - Lotus ILM65A2 Mode D'emploi

CHRONOGRAPH RESET

(INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the chronograph second hand does not
return to the Zero position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button "A" once to set the chronograph second hand to the Zero
position.
3. Press the button "B" once to set the chronograph 1/20 second hand to the Zero
position.
* The chronograph hands can be advanced rapidly by continuously pressing
button "A" or "B".
4. 4.Once the hands are set at Zero position, reset the time and return the crown to
its normal position.
*The Zero position of the chronograph 1/20 second hand is possible to set
optional position (360° 60step).
ILM6SA2
18
ILM6SA2
By virtue of the regulations pursuant to the handling of waste products
deriving from electronic and electrical equipment, end of lifecycle watch
making products must be selectively collected for processing. You may
therefore dispose of your quartz watch making products at any of our retail outlets
or any other authorized collection point. The selective collection, processing, rating
and recycling of these products helps contribute to safeguarding the environment and
protecting our health.
19