Scandyna PODSPEAKERS SmallPod Guide De L'utilisateur page 9

to search for Bluetooth devices.
Once the device has found the SmallPod Bluetooth speakers, you select them and enter the code.
The connection code is 0000.
If you need to connect a new device to the SmallPod Bluetooth speakers, you need to press the Pause
button followed by the Match button to connect with a new Bluetooth device.
Auto Standby
If the SmallPod Bluetooth doesn't receive any signal for 10 minutes it will automatically enter standby
mode. Press the Power On button to turn the SmallPod Bluetooth speakers back on, after entering the
standby mode.
ENGLISH /
Running-in period
We recommend a running-in period of your new SmallPod Bluetooth speakers of approximately 15-20 hours at normal listening level
before you decide on the final positioning and settings of the speakers.
During the running-in period, the drive units will settle in and perform as intended.
ENGLISH /
Care and cleaning
We strongly advise against the use of any solvents or cleaners on the lacquered cabinet.
The cabinet surface usually only requires dusting or cleaning with a damp soft cloth (only use cold clean water). Avoid touching the
drive units, as this may damage the loudspeaker.
ENGLISH /
Environmental information
SmallPod Bluetooth complies with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and
electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE) - the crossed bin symbol indicates compli-
ance and that the products must be appropriately recycled or processed in accordance with these directives.
// 9