Connection And Operation - Scandyna PODSPEAKERS SmallPod Guide De L'utilisateur

ENGLISH /

Connection and operation

Connect the two SmallPod Bluetooth speakers with the included speaker cable and then plug in the power
cable.
Note! The connecting cable consists of a round and a square cable.
Make sure that the square cable is connected to the black binding post and the round cable
is connected to the red binding post on both speakers.
ENGLISH /
Connecting with Bluetooth devices
First time setup
First you press the Bluetooth button, and then press the Match button to connect a new device to your
SmallPod Bluetooth speakers. The blue LED will flash quickly.
Then you turn on the Bluetooth on your device (smartphone, notebook etc.) and it will automatically start
to search for Bluetooth devices.
Once the device has found the SmallPod Bluetooth speakers, you select them and enter the code.
The connection code is 0000.
The second time you power on the SmallPod Bluetooth speakers, the Bluetooth will automatically start to
search for and connect to the Bluetooth device that was connected to the SmallPod Bluetooth speakers,
when they were last turned on.
If the SmallPod Bluetooth speakers fail to connect to the latest Bluetooth device that was connected, you
can press the Bluetooth button, and then press the Match button to connect a new device to your
SmallPod Bluetooth speakers. The blue LED will flash quickly.
Then you turn on the Bluetooth on your device (smartphone, notebook etc.) and it will automatically start
// 8