General Settings - Ten Haaft SunMover Manuel D'utilisation

General settings

Language:
Selection of the language for the texts displayed on the control panel.
Backlight:
E
Selection: 2 – 60 (in seconds)
The backlighting of the display will go out a certain number of seconds after any of
the buttons is pressed or after the last action of the SunMover®. You can adjust this
delay time here.
Firmware update:
This menu option is used to upload Firmware updates (i.e. more recent operating
software) during servicing.
Service info:
Different types of information which are of interest for servicing purposes can be
called up here.
Mechanical adjustment:
This item is used during servicing to make basic mechanical adjustments to the
system.
Assembly position:
Call up this menu item to move the holding arms for the solar panel into the as-
sembly position. This only needs to be done when the system is fi rst installed. Please
refer to the Installation Instructions for more information.
43