Restarting Solar Mode - Ten Haaft SunMover Manuel D'utilisation

Restarting solar mode

If you have stopped the system while it was opening or closing by pressing , or if
the motor electronics have detected a fault, for example obstruction of the motor
by branches of a tree, then you can restart normal solar mode again by pressing .
If the same fault is still present then the system will of course recognise the same
E
motor obstruction again and interrupt operation.
If you press button in this situation then the system will be retracted and shut
down.
You can use button to restart normal solar mode after a fault. However,
before doing this locate and remedy the cause of the fault to avoid damage to
the solar panel.
38