Guarantee Certificate - Astralpool Skimmer 15L Manuel D'installation Et D'entretien

ENGLISH
IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be implemented for installation and start-
up. Therefore, the installer as well as the user must read the instructions before beginning installation and start-up.
Keep this manual for future reference.
To achieve optimum performance of the Skimmer, follow the instructions provided below:
1. General characteristics
Skimmers are primarily used to eliminate surface debris from the pool water. For this reason it is advisable to bear this in mind when building the pool to
ensure that the skimmers are installed with their mouths facing the prevailing winds.
2. Installation
In order to select the number of skimmers which need to be installed in a pool, it is advisable to follow the following rule of thumb: 1 skimmer per 25 m2 of
pool water surface area, taking into account that the maximum flow rata through a skimmer should not exceed 5 m³/h, in 15L skimmers and 7.5 m
skimmers approximately.
Generally speaking, in pools where there are 1 to 2 skimmers, these should be placed along the width of the pool at the deep end. In pools of 3 or more
skimmers, they should be placed along the length of the pool. In all cases they should be positioned opposite the return Inlets. (Fig. 1)
3. Assembly
Instructions:
•
Insert the inlet through the inside of the pool and secure the 16 screws (Fig. 2).
•
Glue the skimmer inlets and casing, using the adhesive supplied, as shown in Fig. 3. This area must be clean and dry.
THE MANUFACTURER IS NOT RESPONSIBLE FOR THE GLUEING CARRIED OUT BY THE INSTALLER OR CUSTOMER.
•
Attach the clips as shown in Fig.4. Wait 24 hours before handling the skimmer. After 24 hours, check that the adhesive is completely dry.
•
Complete the assembly by inserting the different parts (Fig. 5):
During the functioning it must be guaranteed that the water level is high enough, to prevent the absorption of air. If the level of the water gets too high, the
skimmer has a valve for releasing any excess water (Fig. 6).
Attention: To extract the cover and the basket of the skimmer it must be taken into account that they are gotten on with a system of bayonet, don't throw it
strongly up, must be turned first towards a side until it does to coincide the two flat sides of the basket with those of the body and to throw itself afterwards
up carefully.
4. Pool cleaner
Skimmers can also be used for other functions including a connection point for the pool cleaner hose as in fig. 7.
To connect the pool cleaner to the skimmer, place the cover of the skimmer in the basket and insert the hose connection of the pool cleaner in the centre
hole of the cover (Fig. 8). In order for the vac head connected to the skimmer to work properly you must previously ensure that the valve controlling the main
drain suction has been slint.
Should the pool contain more than one skimmer all the other skimmers should be closed off using the flow plug provided or cover the basket with the
corresponding cover (Fig. 9).
Warning: In liner pools, shutting off the other skimmers and main drains could resalt in the vac head sticking to the liner.
5. Safety warnings
•
The skimmer should be installed by a specialist technician.
•
Do not place chlorine or bromide tablets in the skimmer basket.
•
It is recommended not to use sealing filler in this product and in any case. only use products specifically designed to work with ABS. Universal products
should not be used.
1. GENERAL TERMS
1.1. In accordance with these provisions, the seller guarantees that the product corresponding to this guarantee (Skimmer for panels) is in perfect
condition at the time of delivery.
1.2. The Guarantee Term for the Product is two (2) years from the time it is delivered to the purchaser.
1.3. In the event of any defect in the Product that is notified by the purchaser to the seller during the Guarantee Term, the seller will be obliged to repair
or replace the Product, at his own cost and wherever he deems suitable, unless this is impossible or unreasonable.
1.4. If it is not possible to repair or replace the Product, the purchaser may ask for a proportional reduction in the price or, if the defect is sufficiently
significant, the termination of the sales contract.
1.5. The replaced or repaired parts under this guarantee, will not extend the guarantee period of the original Product, but will have a separate guarantee.
1.6. In order for this guarantee to come into effect, the purchaser must provide proof of the date of purchase and delivery of the Product.
1.7. If, after six months from the delivery of the Product to the purchaser, he notifies a defect in the Product, the purchaser must provide proof of the
origin and existence of the alleged defect.
1.8. This Guarantee Certificate is issued without prejudice to the rights corresponding to consumers under national regulations.
2. INDIVIDUAL TERMS
2.1. This guarantee covers the following Astralpool products and ranges: Skimmer for panels.
2.2. For this guarantee to be effective, the purchaser must strictly follow the Manufacturer's instructions included in the documentation provided with the
Product, in cases where it is applicable according to the range and model of the Product.
2.3. When a time schedule is specified for the replacement, maintenance or cleaning of certain parts or components of the Product, the guarantee will only
be valid if this time schedule has been followed.
2.4. The manufacturer of the product offers the possibility of extending the guarantee of filters from the third year up to the fifth or tenth year depending
on the model as indicated below. This Guarantee Extension is governed by the following terms:
3. LIMITATIONS
3.1. This guarantee will only be applicable to sales made to consumers, understanding by "consumer", a person who purchases the Product for purposes
not related to his professional activities.
3.2. The normal wear resulting from using the product is not guaranteed. With respect to expendable or consumable parts, components and/or materials,
such as batteries, light bulbs, etc. the stipulations in the documentation provided with the Product, will apply.
3.3. The guarantee does not cover those cases when the Product; (I) has been handled incorrectly; (II) has been repaired, serviced or handled by non-
authorised people or (III) has been repaired or serviced not using original parts.
3.4. In cases where the defect of the Product is a result of incorrect installation or start-up, this guarantee will only apply when said installation or start-up
is included in the sales contract of the Product and has been conducted by the seller or under his responsibility.
Glue a flat gasket.
Glue the pool liner.
Fix the flat gasket.
Attach the flange and tighten the 18 screws DIN 7982 5.5x25.
Place and clip on the trim.
Attach the skimmer flap door.

Guarantee Certificate

3
/h in 17L