MiniMan
To assemble ball joint, fallow instruction below.
1. Discharge dowel from ball cage.
2. Fit ball cage to the ball.
3. Resupply dowel.
051113/0 MiniMan-75
MoUNTING INSTRUCTIoN
© Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced,
handed over, copied, xeroxed or translated into another language in any form or means without written
permission from Plymovent AB. Plymovent AB reserves the right to make design changes.
MMh
bsab no: t0.31
ser.no: MMa/Ma
date: aug-00
replace:
MMs
MiniMan/75/usa/can/8/14
EN - 7