Sony GPS-CS3KA Mode D'emploi page 29

x Applying positioning information to images
1
Click [Add Position
Information to Files] at the
lower right of the GPS Image
Tracker screen.
The [Add Position Information] dialog
box appears.
2
Click [Add] or [Create Copies...].
The positioning information is applied to all the image files in the list, and then
the image files are saved and removed from the list.
To apply positioning information to a specific image
1 Double-click the image to which you want to apply positioning information on
the list on the right of the GPS Image Tracker screen.
2 Click [Add].
Positioning information is applied to the selected image, and then the image is saved
and removed from the list.
Notes
You cannot save images set to read-only. Reset the read-only attribute of the files, and then import
•
them to GPS Image Tracker again.
Even if you click [Create Copies...] to save images, you cannot duplicate and save movie files.
•
Tip
When the computer is connected to the Internet, the tracks recorded by the GPS logs will appear on
the map of the main window. (Even if the computer is not connected to the Internet, the GPS logs are
imported correctly.)
29