Inserting A Battery; Removing The Battery - Sony GPS-CS3KA Mode D'emploi

Inserting a battery

You can use one of the following batteries.
• LR6 (size AA) alkaline battery
• HR6 (size AA) Nickel-Metal Hydride battery (recommended)
Note
The battery life of an LR6 (size AA) alkaline battery is shorter at temperatures lower than 25 °C
(77 °F). It is recommended that you use a Nickel-Metal Hydride battery.
1
Open the battery cover.
2
Observe the e/E marks on the
battery compartment, and insert
the battery with the correct
polarity.
Insert the E side first as shown to the right.
•
3
Close the battery cover.
x

Removing the battery

Turn the power off, hold the GPS unit with the battery cover up, and then remove the
battery.
Be sure not to drop the battery.
14