3-
Select the network in the
4- Enter the router network password
router list
. (1*)
Send Informations to the product.
5 -
Exit application, wait until the product turns green. Connect to your router,
you can now open and use your product SolemWF
6 -
To configure another products on the router, repeat step
beginning
.
(1*)
If you don't see your router in the list of available networks, you must
get closer to your router or add a repeater Wi-Fi or using PLC Wi-Fi technology.
15
Mount the unit on a dry indoor wall with 2 screws supplied.
Use a 6mm bit of drill to make a hole in the wall
The WF-IP (Irrigation Battery modules) are working exclusively in association
with WF-MB (Wi-Fi / Radio relay). It's possible de have until 8 Irrigation Battery
modules on only one Wi-Fi / Radio relay. The Relay transforms the Wi-Fi data of
your smartphone into radio signal for the battery module.
.
from the
Prefer the installation of Modules Irrigation battery Modules in plastic valve box
to optimize the radio reach which is about 100m.
To Associate an Irrigation battery module ( WF-IP) with a Wi-Fi / Radio relay
( WF-MB), please do the following steps :
MOUNTING MODULE
INITIALIZING WF-IP
(Irrigation Battery Module)
Radio 100m
WF-MB
16
WF-IP
WF-IP
WF-IP