Open the Application and select ''Irrigation'' and the ''radio relay''.
Press ''Associate'' and then ''Detect a battery module''.
Make a Short circuit on the battery pressure of the battery Module Irrigation
during 10s and then connect the battery (See Plan below).
Contact on battery pressure 10 s
with screwdriver or metallic object
Wait until one minutes, the Irrigation battery module will appear on the list. Mark
the Irrigation Battery module to be associated and press ''Associate module''.
If you did not associate your module in the 2 minutes which follow the beginning
of the detection on the application, it will be necessary to begin again the
operation, to redo a Short circuit and relaunch the detection.
17
You can connect one or more products on your Internet Router.
Plug and insert Battery
Your network product will be visible and programmable entirely
from your Smartphone or Tablet just by connecting on your
After completing step
The following page will then appear on the
1- Name your module
(Visible Name in the App)
2- Select ''Setup as client of another Wi-Fi network''
CONNECT THROUGH A ROUTER
" Client Mode via a router "
Router
, run the SolemWF Application.
screen.
14
Router.