Step 2: Connect The Audio Cord; Step 3: Connect The Power Cord; Step 4: Secure The Cords And Close The Back Cover - Sony SDM-M51 Mode D'emploi

Step 2: Connect the audio cord

Open the back cover and turn off the display before connecting.
Note
Do not open the back cover more than 90 degrees, otherwise damage may
result to the back cover or latch.
to audio input of the
computer or other audio
equipment

Step 3: Connect the power cord

With the monitor and computer switched off, first connect the AC
adapter and power cord to the monitor, then connect it to a power
outlet.
to a power outlet
power cord (supplied)
8
to audio input
OPEN
audio cord (supplied)
to DC IN
OPEN
AC adapter (supplied)
Step 4: Secure the cords and close
the back cover
1
Remove the cable holder.
2
Secure the cables and cords with the cable holder.
3
Close the back cover.
Bandle the cables and cords
You can bandle the cables and cords by using the supplied cord
clip.
OPEN
Cable holder
Cable
holder
Cord clip