Mitsubishi Electric Ecodan PAR-WT50R-E Mode D'emploi page 4

Do not drop the device.
Do not wipe the device with
benzine, thinner, and a chemical
impregnated cloth or the like.
Do not put hazardous materials
around the device.
Do not disassemble the device.
Do not use the device in particu-
lar environments.
Do not use sharp objects to
press the buttons.
Do not wash the device with wa-
ter or solution or the like.
Do not touch the device with wet
hands.
Always observe the operating
temperature and humidity re-
quirements.
Observe the following and handle batteries properly. Otherwise it could result in explosion, leak-
age of electrolytic liquid, or heat generation.
1) Do not charge the batteries.
2) Place the batteries with correct polarities.
3) Do not mix up new and old batteries or different types of batteries.
4) When the batteries have run out, remove them from the device immediately.
Disposal
This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information for us-
ers and Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users
and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materi-
als and components which can be recycled and/or reused. This symbol means that electrical
and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed
of separately from your household waste. If a chemical symbol is printed beneath the symbol, this chemical
symbol means that the battery or accumulator contains a heavy metal at a certain concentration.
This will be indicated as follows: Hg: mercury (0.0005%), Cd; cadmium (0.002 %), Pb: lead (0.004%)
In the European Union there are separate collection systems for used electrical and electronic products,
batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local community waste col-
lection/recycling centre.
Please, help us to conserve the environment we live in!
2
Caution
This could break the case or break down the device.
The device could be discolored and damaged.
If the dirt is hard to remove, wipe it with a well wrung-out cloth
with diluted mild detergent, and dry moisture with a dry cloth.
Avoid installing the device in the place where flammable gas
may leak. Should leaked gas build up around the device, fire
or explosion could occur.
Direct contact with the control board inside is hazardous and
also could result in fire, breakdown, and reduction in operating
performance.
Do not use the device in particular environments where the
following substances are present in large amounts: oil, vapour,
organic solvent, corrosive gas (such as ammonia, sulphuric
compounds, and acid or the like) , or where acid or alkali solu-
tion, or particular sprays are used frequently. This could affect
operating performance, or cause corrosion which could result
in electrical shock, breakdown, smoke generation, or fire.
(e.g. around kitchen sink, gas cooker, bath room, wash stand
or the like)
Electric shock or breakdown may occur.
Electric shock or breakdown may occur.
Electric shock or breakdown may occur.
Always observe the operating temperature and humidity require-
ments. Otherwise severe damage to the device could result. For
more details, refer to the specification table in this manual.