Playing on the Micro Player™
1. Remove the battery cover located on the back of the console.
2. Insert 4 AA batteries and replace the battery cover.
3. If you do not want to use batteries, gently insert the Micro-USB end of a Micro-USB cable (not included) into the
power port (5V IN) located on the back of the console. Gently insert the other end of the cable into a powered USB
port. When using this option you do not need to add batteries.
4. Press the on/o button.
5. Press the coin button to add credits and then press the 1 PLAYER or 2 PLAYERS button to begin.
NOTES:
• High score does not save after the device has been turned o .
• You must add at least 2 credits to play 2 player.
Battery information
Leakage of battery acid can cause personal injury as well as damage to this product. If battery leakage occurs,
thoroughly wash the a ected skin and clothes. Keep battery acid away from your eyes and mouth. Leaking
batteries may make popping sounds.
• Batteries should be installed and replaced only by an adult.
• Do not mix used and new batteries (replace all batteries at the same time).
• Do not mix di erent brands of batteries.
• We do not recommend using batteries labeled "Heavy Duty", "General Use", "Zinc Chloride", or "Zinc Carbon".
• Do not leave batteries in the controller for long periods of non-use.
• Remove batteries and store them in a cool, dry place when not in use.
• Remove depleted batteries from the unit.
• Do not put the batteries in backwards. Make sure that the positive (+) and negative (-) ends are facing in the
correct direction. Insert the negative end first.
• Do not use damaged, deformed or leaking batteries.
• Do not recharge non-rechargeable batteries.
• Remove rechargeable batteries from the device before charging.
• Dispose batteries only at the government approved recycling facilities in your area.
• Do not short circuit battery terminals.
• Tampering with the product can result in damage to your product, void of warranty and could cause injuries.
• Warning: CHOKING HAZARD small parts. Not suitable for children under 36 months.
• The restriction accompany the age warning.
• Adapter for use with the device requires: DC 5V, 250mA.
• Only use an adapter that meets the device's requirements.
• The adapter is not a toy.
• Adapters used with the device are to be regularly examined for damage to the cord, plug, enclosure and
other parts.
3