Maintenance; Maintenance Schedule; Maintenance Work - Pressure-Pro PP3425H Mode D'emploi

7 Maintenance

Maintenance Shedule
7.1
7.2.1 Water fi lters
7.2.2 Checking the pump oil quality
Note:
Change engine oil per specific engine manual
Service on engine: See attached user instructions for engine.

Maintenance Work

7.2
7.2.1 Water filters
1. Remove garden hose and filter at
inlet and thoroughly clean.
Checking the pump oil quality
7.2.2
1. The pump is sealed (no vent).
2. Check color of pump oil through the sight glass (if
provided).
If the oil has a gray or white shade, change the oil
(see section 7.2.3)
3. Top off oil level with fresh oil if necessary.
Oil type
7.2.3 Change of oil
1. Unscrew the oil drain plug and drain oil into a suitable container.
2. Check that the drain plug gasket is in place and reinstall drain plug.
3. Fill pump with proper grade and amount of oil.
Oil grade and capacity
10
After the first 50
Weekly
operating hours

Every six
months or As
500 operating required
hours
