Operating Modes; Video Mode - Yukon RANGER RT 6.5x42 Mode D'emploi

9

OPERATING MODES

The operating modes are as follows:
Video (video recording)
Photo (image capture)
R eview (video and image review)
When first switched on, the unit is in Video mode. Switch between operating modes by a long press of the REC
(12) button. This enables you to cycle between modes (Video->Photo->Review->Video...)

VIDEO MODE

Video recording mode is the default mode.
Video recording mode is shown by the
Sound recording is shown by the
Full magnification is shown with by special icon (i.e. 13x) on the display.
To start or stop video recording, briefly press the REC (12) button.
The LED indicator (16) blinks while recording is on.
Video clips are saved in the internal Flash memory when video recording is stopped or the unit is turned off.
7
VIDEO mode
01:42
icon on the display.
icon on the display.
Video recording indication on the display:
The REC (12) icon appears in place of the "VIDEO" icon.
Display icons are not recorded.
You can enter and navigate the menu during video recording.
Note! You can stop recording video only after exiting the menu.
Note: maximum duration of a recorded file is seven minutes. After this
time expires a video is recorded into a new file. The number of recorded
files is limited by the capacity of unit's internal memory.
ZOOM SOUND
13x
IR Illuminator and brightness. In VIDEO mode the display shows the following information:
IR Illuminator power level – shown by the corresponding icon -
. If the IR Illuminator is off, the icon is not displayed.
Brightness level.
04:23pm Current time
Brightness level (from 0 to 20) is displayed only during brightness
adjustment.
Wi-Fi
Wi-Fi connection is shown in the top right corner of the display.
Record timer ZOOM SOUND
13x
Video
REC 00:42
recording
00:02
Elapsed
recording
time
Available Brightness
recording time adjustment
VIDEO
13x
01:42 15
mode
04:23pm
Current time
8