Remote Control; Front And Rear Panel - Beamz Beam Série Manuel D'instruction

REMOTE CONTROL

With the IR remote, you can operate the laser easy and you have many functions.
To control the fixture you must aim the remote at the front of the fixture and be no more
than 30 feet away.
1. Power On/Off
2. Auto mode
3. Sound active mode

FRONT AND REAR PANEL

Number Name
1 Laser aperture
2 Remote Receiver
3 Power switch
4 Power in
5 Key switch
6 Interlock
7 Display
8 DMX
9 Mic sensitivity
Function
Laser output, do not look directly into this aperture.
IR remote receiver
On/ Off
AC 100~240V IEC power input
Key switch for laser output
Laser output is available only when the interlock is connected. It could be used to connect a
laser emergency switch.
Menu for setting mode
DMX in/out 3 pin XLR interface
Adjust sound sensitivity from minimum to maximum.