Setting The Wake-Up Timer - Yamaha CRX-N560 Mode D'emploi

Using the clock
Setting the wake-up
timer
Music or beep will be started at the time you set.
1
Press and hold .
• [Timer Setting] and time are shown on the front
panel display, and and hour flash.
2
Set the following items, 1 to 3.
• Press
/ to select a setting value and press
to set the item.
• The display switches to the next item.
• To cancel the setting, press
1
Start-up time
Set the hour and minute.
2
Volume
Can be set between [5] to [59], and [MAX].
3
Repeat
Repeat: Wake-up timer sounds everyday at
the set time.
No Repeat: Wake-up timer sounds once.
Continue to the next page \
32
En
.
• Set the clock before setting the wake-up timer.
• Wake-up timer is not available when [Power
saving] is set to [Eco]. Set it to [Normal] (
A
• You can also set the wake-up timer using the
option setting.
1 Press
- The setting menu is shown on the front panel
display.
Press
2
OPTION
.
3 Perform step 2 on the left.
4 Press
2
5 Set the music source, play back the source, and
press
/ ,
ENTER
1
TIMER
P.12).
.
/ to select [Timer Setting] and press
to finish the option setting.
.