PRO-PULSE 5726014 PAK152n Manuel De L'utilisateur page 14

IMPORTANT SAFETY INSTRUCTIONS
22. PREVENT ELECTRIC SHOCK.
surfaces: pipes, radiators, ranges, and refrigerator enclosures. Before
driving fasteners into walls, floors, or wherever "live" electrical wires may be
encountered, try to ascertain whether there is a danger of shock.
23. KEEP WORK AREA CLEAR
24. ALL USERS must follow the safety warnings and all other instructions in
this manual. Keep it available for use by everyone assigned to use this tool.
SPECIFICATIONS
Shoots industry standard 18 gauge brad nails in the following sizes: 5/8" (15
„
mm), 3/4" (20 mm), 1" (25 mm), 1-3/16" (30 mm), 1-3/8" (35 mm),
1-9/16" (40 mm), 1-3/4" (45 mm), and 2" (50mm).
These brads are perfect for installing trim and mouldings, for cabinet and
„
furniture making, picture framing, and for applications where gluing is
necessary, but clamping is impractical.
Working pressure (min-max): 60-100 PSI
„
Air consumption is 2 – 4 CFM (57-113 litres) per min @ 60 to 90 PSI.
„
Quick-release nose piece.
„
Padded hand grip.
„
Adjustable exhaust deflector
„
Air inlet: 1/4" NPT
„
Included:
„
= S3 hex key
= S4 hex key
= Small bottle of air tool oil
Tool weight: 3.3 lbs (1.5 kg)
„
SETUP & OPERATION
AIR SYSTEM
The brad nailer is designed to operate on clean, dry, compressed air, regulated
„
at 60-100 PSI. The preferred system would include a filter, a pressure
regulator, and an automatic oiler located as close to the tool as possible
(within 15 feet (5m) is ideal). Do not use bottled air or gases. Please see
figure below:
All compressed air contains moisture and other contaminants that can harm
„
the internal components of the tool. An air line filter will remove most of
these and significantly prolong the life of the tool. Ensure the in-line oiler has
sufficient oil. If an in-line oiler is not available, place 2 drops of oil into the tool's
air inlet at the beginning of each workday. Any extra oil will be expelled from
the tool's exhaust during firing.
Nailer
Quick Connector
14
PAK152n
Prevent body contact with grounded
of obstructions.
Oiler
Air Hose
Filter
Regulator
Air Supply