General Settings - iRoom iO83 Mode D'emploi

Page 4
Caution: It's necessary to follow this instructions!
Set-up iRoom's iO83 Relay Card
Each relay card needs to be configured to be able to use it in combination with the
iBezel / iTop, since the IP address of each iO83 relay card will be 10.10.100.254 out of
the box! In order to avoid IP conflicts please configure each relay card individually
before using it in the local network.

General Settings

Step 1 Power up the relay card through the universal power supply.
ATTENTION, do not plug in the network cable before the configuration is done!
Step 2 Open "Settings" on your iPad and connect to the Wi-Fi network "iRoom-IO-83".
Step 3 Open "Safari" and enter 10.10.100.254 in the URL text field.
Step 4 Log-in. User Name = admin / password = admin
Step 5 This page allows already to control the relays wirelessly via the iPad. Press
"Settings" to continue the configuration and confirm the next "Pop up screens"
with "Ok".
ATTENTION
If you want to use the relay card with Wi-Fi, proceed with Step 6. If you want to
use the relay card via a hardwired connection (without Wi-Fi), proceed with
Step 7 (without Wi-Fi).