Disinfection of the nebulizer unit
In the case of infectious illnesses, you need to follow below steps to
disinfect the nebulizer unit additionally. We recommend, that this
measure is performed regularly either in the morning or the evening
at a fixed time:
Rinse the nebulizer unit with distilled water.
Ÿ
Boil some distilled water in a pot.
Ÿ
As soon as the water is boiling, take the pot away from the
Ÿ
cooking area and put the nebulizer unit into the water for approx.
10 minutes.
Remove the nebulizer unit from the water and let it dry and cool
Ÿ
down on the open air (e.g. on a towel).
Alternatively (instead of using distilled water) you may disinfect
Ÿ
the nebulizer unit with a solution of 75% cleaning alcohol - with
this, the time to put the unit into the liquid reduces to 1 minute
only. Afterwards, rinse the unit with distilled water and let it dry on
the open air.
Make sure that no disinfectant residues are left behind on the
Ÿ
parts of the device to ensure safe inhalation when next used.
WARNING
• NEVER put the nebulizer unit directly into the boiling water
when the pot is still on the cooking area!
• Solutions with alcohol are highly flammable. Therefore,
NEVER clean the device near open fire or smoke.
Transportation and storage
Store the appliance with all parts in a dry and clean place.
Ÿ
Make sure, that no residual liquids are in the ingredient tank
Ÿ
2
during storage or transportation.
Remove the batteries if you do not use the device for a longer
Ÿ
time.
Avoid storage locations with direct sun exposure, extreme
Ÿ
temperatures and high humidity.
Always keep the device away from fire, electromagnetic
Ÿ
radiation and from children.
4 Miscellaneous
GB
25