CLEANING THE DUST FILTER
1
Pull the dust bin cover to open.
3
Shake the ilter to remove dust, then wash
the ilter.
5
Put the ilter into the dust bin.
Make sure the ilter is completely dry before putting it back into the vacuum cleaner.
Allow 12 hours for it to dry.
Do not use wet ilter.
Replace the dust ilter if it becomes damaged or deformed.
The dust bin cover will not close if the ilter is not installed correctly.
2
Remove the ilter from the dust bin.
4
Let the ilter dry for more than 12 hours.
English - 17