CACHPejse BIO ETHANOL BURNER Manuel De L'utilisateur page 9

Troubleshooting
Problem
Formation of soot.
Formation of soot.
Short burning time.
Short burning time.
Too large flames
Too small flames
The flames does not extin-
guish when the metal cover
is closed.
Possible cause
Incorrect fuel has been used.
Burner opening is covered
with decoration.
Incorrect fuel has been used.
The burner has not been
completely filled up.
Wrong fuel or too much draft
Fuel is almost depleted.
Can occur on larger burners
if you switch off the fireplace
in the middle of the burning
time. The cover is not 100%
airtight and bioethanol
vapours can therefore escape.
Løsning
Only use bioethanol for
biofireplaces.
Make sure the opening is free
of decoration.
Only use bioethanol for
biofireplaces.
Turn off the burner and let i
cool for 30 minutes and refill
the burner.
Use correct fuel.
Avoid drafts around the
fireplace
Turn off the burner and let i
cool for 30 minutes and refill
the burner.
Fully open the metal cover
and close it again quickly to
stop the supply of oxygen.
9