Remote Control - CONTINENTAL EDISON CELED654KB2 Guide D'utilisation

Remote Control

1.VEILLE(STANDBY): Switch the set between ON and STANDBY.
2.MUET(MUTE): Switch the sound on or off.
3.0~9: Figures 0-9 are used to directly input channel
number.
4.RAPPEL: Return to the channel selected last time
5.CH.LISTE : Press to show the channel list program.
6. VOL +/- : Increase/decrease the sound level.
P.MODE: Select the different picture mode directly.
S.MODE: Select the different sound mode directly.
SOURCE : Display the source list of input signal.
CH +/- : Select a program.
7.▲/▼/◄/► : Navigation buttons
OK : Confirm selection.
SORTIE(EXIT) : Return to TV viewing from any menu.
MENU : Select a menu.
8. REC: Start recording of the current digital channel.
TIMESHIFT: Press the TIMESHIFT button when you
want to pause; press the button again to resume
playback of the TV program.
HEURES: Enter the setup menu of time recorder.
REC.LISTE: Display the list of recorded programs.
RED / GREEN / YELLOW / CYAN:
Available in the following modes: teletext, DTV and TV.
ASPECT : Select available format.
TV/RADIO : Switch the unit between TV and
Radio.(Digital radio is not available in countries such as
France.)
SLEEP : Sleep time setting.
SOUS-TITRE : Recall your preferred subtitle in digital
mode.
INDEX: Ask for the list of main TV letter broadcast page
number.
RÉVÉLER: Display the characters hidden.
AUDIO: Press AUDIO to change audio mode.
AFFICHER: Display the system state information on set by active user.
TEXTE: Display the teletext on screen.
TAILLE: Change the size of current page.
SUBPAGE: Display the current subpage.
HOLD: Hold the current page and present again.
49