Installation Instructions - Screen Research T-X4R Manuel D'installation

Fixed frame screen with masking installation and operation manual
WARNING:
See images on the end pages of this manual. It 's absolutely forbidden to install the screen on mobile walls or unstable cables,the brackets must be applied on surfaces that are suitable to maintain the
correct distance over time
When installing the screen use plugs and screws suitable for the screen's weight and for the type of wall or ceiling on which the mount brackets are to be fixed, based on the following criteria:
WARNING:
Use the provided fabric to cover the assembly area as to awaid damaging the product.
Make sure that any control systems are fitted in an area easily accessible for future servicing and checks.
PIGRIP system attachment, SUGGEST:
This screen uses the Pi-Grip fabric attachment system. In the following images you can see the sequence you have to folow to install the plastic profiles.
To obtain the best results interms of flat surface and BB, we suggest that you always tension the fabric from the centre to the edges of the projection area and to fix the plastic profile afterwards following the
images below with the help of provided wodden hummer. After fixing the fabric, please cut the parts in excess with the provided cutter.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: T-X4R - Installation Manual rev1 | 23.08.2018

07 INSTALLATION INSTRUCTIONS

WARNING !!!
The screen is made of different horizontal and vertical parts that are pre-
assembled at the factory.
Colored circular labels have been applied in the corners of the assembly
parts to verify the correct positioning of each element.
ENGLISH
Page 14