Technical Specifications - EuroLite BLACK GUN UV-Spot Mode D'emploi

Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Dimensions (LxWxH):
Weight:
Fitting lamp:
OMNILUX UV-Lamp 400W E-40
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Please note: Every information is subject to change without prior notice. 30.05.2007 ©
230 V AC, 50 Hz ~
700 W
355 x 355 x 305 mm
9 kg
Article No.:
89514005
:
45° C
a
(steady state): 120° C
B
0.5 m
1 m
T 5 A, 250 V
17/31 00025937.DOC, Version 4.0