Installing And Charging The Battery; English - THOMSON TH201 Guide D'utilisation

1. Inserting a SIM card
• Switch off off the phone and pull the card drawer away from the
smartphone.
• Insert the SIM card correctly in the space provided (see diagram).
You have 2 SIM card ports (SIM1 and SIM2,
• the 2 SIM cards must be of different format: 1 Micro SIM and 1 Nano
SIM). Be sure to respect the direction of insertion of the cards.
• Then replace the drawer.
CAUTION: The 4G functions can only be used on one SIM card.
2. Inserting a MicroSD
• Switch off the phone and pull the card drawer away
from the smartphone.
• Insert the memory card in the space provided
(Caution: inserting an SD card does not allow dual SIM
system, if a MicroSD is inserted, the SIM card must be
in Micro SIM format (or 1 Nano SIM with a Micro SIM
adapter)).
• Then replace the drawer.
CAUTION: Inserting or removing a SIM card or a MicroSD card requires the smartphone to
be completely switched off.

3. Installing and charging the battery

Charging the battery:
• To charge the battery, connect the USB cable (supplied) to the USB port of your
smartphone and the other end to the mains adaptor (supplied). Then connect the mains
adaptor to a power outlet.
• The battery charge icon illuminates during charging and indicates the charge status.
• When the battery is fully charged, you can disconnect the USB cable from the device
then from the power outlet.
IMPORTANT:
• The smartphone is only recharged via its USB port.
• Ensure your smartphone is fully discharged before charging it for the first time.
• The battery must be charged for at least 5 to 8 hours when first charged.
Note: You can use the device when it is being charged. In this case, the battery may take
longer to charge fully.
4. Switching the smartphone on and off
To switch the smartphone on, press the On/Off button located on the side of the

English

- 13 -