Greencut GTC300X Manuel D'utilisation page 74

74
PLACE THE GEAR CHANGE
1. Unscrew the screws of the gearbox cover with the key provided (do not remove the cover).
2. Place the steering mast on top of the gear cover and secure it with the screws.
3. Mount the gear lever on the selector and secure it with the pin by placing the head at the bottom and
securing the pin through the hole at the top.
4. Remove the pin and pin from the gear lever base.
5. Align and insert the lever extension and secure with the previous pin and pin.
1
4
PLACE THE HANDLEBAR
1. Remove the mast adjustment cam.
2. Place the handlebar on the mast and adjust it to your liking, fix it with the adjustment cam by screwing it in.
3. Mount the mast trim by placing it over the joint of the handlebar and mast.
4. Fasten the trim with three star screws using the supplied tool.
1
3
2
5
2
4
3