Delete One - Kenwood KDC-X599 Mode D'emploi

BLUETOOTH®
NUMBER DIAL 1 Turn the volume knob to select a number (0 to
9) or character (
2 Press S / T to move the entry position.
1
Repeat steps
the phone number.
3 Press the volume knob to call.
(or using RC-406)
1 Press the number buttons (0 to 9) to enter the
phone number.
2 Press to call.
VOICE Speak the name of the contact you want to call or
the voice command to control the phone functions.
( Make a call using voice recognition)
BATT *
LOW/ MID/ FULL: Shows the strength of the
battery.
SIGNAL *
NO SIGNAL/ LOW/ MID/ MAX: Shows the strength
of the current received signal.
* Functionality depends on the type of the phone used.
Make a call using voice recognition
1
Press and hold to activate the connected
phone.
2
Speak the name of the contact you want to call
or the voice command to control the phone
functions.
• Supported Voice Recognition features vary for
each phone. Refer to the instruction manual of the
connected phone for details.
• This unit also supports the intelligent personal
assistant function of iPhone.
16
Delete a contact
* , #, +).
1
2
2
and until you finish entering
3
4
5
6
7
• To return to the previous setting item, press
• Not applicable for mobile phone that supports PBAP.
Settings in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1
2
3
4
To erase a contact from the preset memory, select [NUMBER DIAL] in step
number.
1
2
3
Press to enter Bluetooth mode.
Turn the volume knob to select [CALL HISTORY], then press the knob.
Turn the volume knob to select a contact.
Press and hold the volume knob to enter delete mode.
Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then press the knob.
DELETE ONE: Selected name or phone number in step
DELETE ALL: All names or phone numbers in [CALL HISTORY] in step
Turn the volume knob to select [YES], then press the knob.
Press and hold to exit.
Store a contact in memory
Press to enter Bluetooth mode.
Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or [NUMBER DIAL], then
press the knob.
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone number.
Press and hold one of the number buttons (1 to 6).
"STORED" appears when the contact is stored.
Make a call from memory
Press to enter Bluetooth mode.
Press one of the number buttons (1 to 6).
Press the volume knob to call.
"NO MEMORY" appears if there is no contacts stored.
3 is deleted.
2
is deleted.
.
2
and store a blank