Maintenance And Cleaning - CTC BSS 7014 Mode D'emploi

Logging on Devices (Pairing)
Before you listen to music via the device, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e. g. mobile phone). For this, refer to the operation
manual of your player.
2. Switch on the device. The indicator lamp (3) will flash
blue. This indicates that the device is in pairing mode.
3. Choose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device "CTC BSS 7014" will
show in your player as a selection.
NOTE:
• Only one playback device can be connected with the
device at one time. If the device is already connected
with another playback device, the device will not
appear in the BT selection menu.
• To disconnect an existing Bluetooth connection,
press the button. The control lamp (3) flashes blue.
Once the connection is successful, acknowledgment tones
can be heard from the speaker and the indicator light glows
blue. For the further procedure, please refer to the user
manual of the playback device. If possible, adjust the volume
of the external device to a comfortable level.
NOTE:
• If the Bluetooth version of your playback device is under
V 2.1, you have to enter the password "0000" to connect
the devices.
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi­ / and mobile data function in
your playback device.
• The Bluetooth compatibility cannot be ensured for de­
vices (e. g. mobile phones) getting released in the future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy­sav­
ing mode. Deactivate the energy­saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
Description of the Control Buttons
NOTE:
• Your playback device must support this function. De­
pending on the device, it may be necessary to start the
music app in advance on your playback device.
BSS7014_IM_CTC
NOTE:
• Depending on your playback device, not all functions
might be supported.
Pause Playback
• Briefly press the button to pause playback.
• Press the button again to continue playback.
Select Music
• Press to go to the next track.
• Press to restart the current track or to go to the previ­
ous track.

Maintenance and Cleaning

CAUTION:
Do not immerse the device in water.
• There are no parts inside the device which can be main­
tained by the user.
• Clean the speaker with a slightly damp cloth without
cleaning agent.
Troubleshooting
Problem Cause
Cannot switch Battery empty.
the speaker on.
No audio Speaker is
signal during switched off.
Bluetooth
Speaker is not
connection.
paired to the
audio source.
Volume too low.
Cannot connect Pairing does not
speaker. work.
Audio source is
turned off.
Bluetooth is
turned off on the
audio source.
Bluetooth
version is not
supported.
Solution
Charge the battery.
( Page 21)
Switch the speaker
on.
Check whether the
connection exists. If
necessary, pair the
speaker to the audio
source again.
Increase the volume
on the device.
Increase the volume
on the audio source.
Check, whether the
audio source supports
the A2DP protocol.
Turn the audio source
on.
Turn the Bluetooth
function on in the
audio source.
Use another playback
device.
23
02.11.17