Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Instruction manual BES M18EH2-GNX50B-BT02-X03
Trouble shooting
Failure
The functioning indicator does not light
up in the electronic evaluation devices
when the proximity switch is actuated
The display "CHK" lights up in the
electronic evaluation devices
No change of
switching signal
Scope of delivery, transportation and disposal
• Inspect packaging and content for damage.
• Check the delivery for completeness.
• Disposal note: Do not dispose the device in the domestic waste, comply with relevant laws and
national regulations.
List of applicable standards
CAN/CSA-C22.2 No. 60947-5-2-14
CAN/CSA-C22.2 No. 60079-0:15
CAN/CSA-C22.2 No. 60079-11:14
UL 60947-5-2 Third Edition
ANSI/UL 60079-0:13
ANSI/UL 60079-11:13
Balluff GmbH
Schurwaldstr. 9
73765 Neuhausen a.d.F.
Germany
Tel. +49 7158 173-0
Fax. +49 7158 5010
BA-S36098-GB-2020-22
Cause of failure
Supply voltage too low or
not connected
cable break or short circuit of
the connetion-cable
Operation of the proximity
switch outside of specification
Page 4
Remedy
Check power supply
Check the connection-cable
Check range of application
of the proximity switch
www.balluff.com
balluff@balluff.de
Dok.-Nr. 947393-EN/FR-E20
Subject to modification
Publicité
Table des Matières
