Omega NC800 Mode D'emploi page 11

OPERATING INSTRUCTIONS
JUICING FUNCTION
1
[On]
On
2
3
Stop
[On]
On
4
FOOD PROCESSING FUNCTION
[REV]
Reverse
ADJUSTABLE
END CAP
BLANK
END CAP
Press [ON] button on the back of the
Omega Nutrition System to start.
®
Gradually put the ingredients into the hopper
chute and press down with the pusher.
DO NOT place any metal objects into
the hopper. If the drum set is clogged
or the machine stops operating, press
the reverse button 2 to 3 times and press
the ON button again to resume normal
operation.
After the extraction or processing is
complete, place the switch in the stop
position to stop.
WARNINg When using [ON] or [Rev]
button, make sure that the auger stops
completely.
Turn the adjustable end cap counter-
clockwise to tighten the squeeze,
increasing the pressure. Turn the
adjustable end cap clockwise to loosen
the pressure. Use the tighter setting
for citrus fruits. Use the loosest setting
for wheatgrass. Using the appropriate
setting will yield more juice.
U s e t h e b l a n k e n d c a p for all food
processing functions from mincing and
chopping to pastas and breadsticks
(refer to pages 22-25).
9