Input Mode - HQ Power VDPLWB Mode D'emploi

Input Mode

Information
7.4 Manual Channel
Manual selection of the channel for data communication.
1. Press MENU until the display shows <Manual Channel>.
2. Press ENTER to confirm.
3. Use UP/DOWN to select your channel.
4. Press ENTER to save your choice.
7.5 Auto Channel
Automatic selection of the channel for data communication.
1. Press MENU until the display shows <Auto Channel>.
2. Press ENTER to save your choice.
7.6 Input Mode
Selection of the data input mode.
1. Press MENU until the display shows <Input Mode>.
2. Press ENTER to confirm.
3. Use UP/DOWN to select your programme.
4. Press ENTER to save your choice.
7.7 Information
General information.
1. Press MENU until the display shows <Input Mode>.
2. Press ENTER to confirm.
3. Use UP/DOWN to select your programme.
4. Press ENTER to save your choice.
7.8 Transmitter Mode
1. Connect the VDPLWB to a DMX controller.
2. Switch on all devices.
3. Press MENU until the display shows <Input Mode>. Conform with
ENTER. Use UP/DOWN to select <DMX>. Conform with ENTER.
4. Press MENU until the display shows <Channel Mode>. Conform with
ENTER. Use UP/DOWN to select your channel. Conform with ENTER.
5. Select the same channel on the fixtures.
V. 01 – 09/02/2015
VDPLWB
<DMX>
<WIFI>
WIFI SSID
WIFI Channel
7
<*******>
<***>
©Velleman nv