HQ Power CAMCOLVC26 Mode D'emploi page 11

Time/Date
Set date and time of the camera.
1. Enter the submenu.
2. Press
select the next digit or character.
3. Press OK [f] to confirm or MENU [a] to exit.
Camera Sound
Enable or disable the key sound option.
1. Enter the submenu and select ON with
2. Press OK [f] to confirm or MENU [a] to exit.
SD Cycle Recording
Enable or disable the overwrite function. When the SD card is full,
photo/video recording will continue but the oldest picture or video
file will be automatically deleted.
1. Enter the submenu and select ON with
2. Press OK [f] to confirm or MENU [a] to exit.
Camera Password
Set a password.
1. Enter the submenu and select ON with
2. Enter your password. Press
press
3. Press OK [f] to confirm or MENU [a] to exit.
Trigger Logs
Enable or disable the trigger time recording only. The camera will
not start photo/video recording but will only record the trigger time.
This function is particularly useful as prospection tool to know when
in the day most triggers occur. Triggers will be recorded on a text
file.
1. Enter the submenu and select ON with
2. Press OK [f] to confirm or MENU [a] to exit.
Reset
Reset the camera to default factory settings.
1. Enter the submenu and select ON with
2. Press OK [f] to confirm or MENU [a] to exit.
About
Information on the software version.
1. Enter the submenu.
2. Press MENU [a] to exit.
V. 01 – 17/11/2014
CAMCOLVC26
or [c, e] to set your digit, press
or [b, d] to select the next digit or character.
or [c, e] to set your digit,
11
or [b, d] to
or [c, e].
or [c, e].
or [c, e].
or [c, e].
or [c, e].
©Velleman nv