HQ Power CAMCOLVC26 Mode D'emploi page 10

2. Press
select the next digit or character.
3. Press OK [f] to confirm or MENU [a] to exit.
Time Lapse
Interval photo/video recording. The PIR sensor will be switched off
and the camera will automatically take a picture or record video
upon the set interval.
1. Enter the submenu and select ON with
OK [f] to confirm.
2. Press
select the next digit or character.
3. Press OK [f] to confirm or MENU [a] to exit.
Delay
Set the interval between two motion-triggered photo/video
recordings. This function prevents from making too many
photo/video recordings and getting a full SD card too fast.
1. Enter the submenu and select ON with
OK [f] to confirm.
2. Press
select the next digit or character.
3. Press OK [f] to confirm or MENU [a] to exit.
Audio Recording
Enable or disable the sound option.
1. Enter the submenu and select ON with
2. Press OK [f] to confirm or MENU [a] to exit.
TV Out
Select the TV encoding system.
1. Enter the submenu and select the system with
2. Press OK [f] to confirm or MENU [a] to exit.
Stamp
Enable or disable on-screen date and time display.
1. Enter the submenu and select the system with
2. Press OK [f] to confirm or MENU [a] to exit.
Frequency
Select the flicker frequency.
1. Enter the submenu and select the frequency with
e].
2. Press OK [f] to confirm or MENU [a] to exit.
Language
Select the menu language.
1. Enter the submenu and select your language with
e].
2. Press OK [f] to confirm or MENU [a] to exit.
V. 01 – 17/11/2014
CAMCOLVC26
or [c, e] to set your digit, press
or [c, e] to set your digit, press
or [c, e] to set your digit, press
10
or [b, d] to
or [c, e]. Press
or [b, d] to
or [c, e]. Press
or [b, d] to
or [c, e].
or [c, e].
or [c, e].
or
or
©Velleman nv
[c,
[c,