Screen Saving Mode - AEG RCB74011NX Notice D'utilisation

Screen saving mode

When will apply;
If you do not want the control panel lights to be on and consume energy unnecessarily
while you have not made any changes in your settings, you may activate this mode.
How to use ;
• W hen you press and hold "SCR. SAVER" button for 5 seconds, this mode will be
activated.
• While this mode is activated, if no key is pressed and if doors are not opened for 10
seconds, lights of the control panel will go off.
• If you press on any key when the control panel's light's are off, currrent settings
appear on the display to let you make any change you wish. If you do not cancel the
screen saving mode or press any key for 10 seconds, control panel will dim again.
• To cancel the screen saving mode, press and hold the screen saving mode button
again for 5 seconds.
• When the screen saving mode is activated, you can also activate child lock function.
• If you do not touch the keys for 10 seconds after activating the child lock function,
control panel's lights will go off. W hen you press any key following this, you can view
previous settings andthe activated child lock and you can cancel the child lock function
as described in that mode above.
EN - 15 -