Troubleshooting - Corradi MAESTRO PERGOTENDA Manuel Utilisateur

Maestro

TROUBLESHOOTING

Problem
Once the command has been sent, the
motor does not start.
Maestro
Motorised
The motor starts but the canvas does
not move.
The canvas movement is not fluid.
IF PROBLEMS PERSIST, OR IN CASE OF PROBLEMS NOT LISTED IN THIS TABLE, PLEASE CONTACT YOUR RETAILER.
12 of 14
Possible cause
Motor overheating.
Power plug is not connected to the mains.
No electricity in the mains.
Possibility of broken belts or disconnected motor shaft.
Runners dirty or not perfectly aligned.
CORRADI SRL - USER MANUAL
Controls and remedies
Wait for 5-10 minutes to allow the motor to cool.
Make sure the plug is properly connected
to a working socket.
Make sure the electricity is working in the house.
Contact the Authorised Retailer.
Clean the runners (see chapter Maintenance).
Rev. 2 - 09.2018