ION Street Rocker Guide D'utilisation Rapide page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Recording from the Aux Input to Tape:
1.
Connect your smartphone, MP3 player, or similar device to the Aux Input using an 1/8" (3.5
mm) cable (not included).
2.
Set the Function switch to Aux.
3.
Connect your external audio device and start its playback. Adjust the output volume on your
source device.
4.
Play your source and check the levels on the Level Display.
5.
To begin recording, press the Record button and the Play button simultaneously.
6.
To stop recording, press Stop/Eject button.
Recording from the Radio to Tape:
1.
Press Stop/Eject to open the cassette holder.
2.
Insert a blank tape and close the cassette holder.
3.
Set the Function switch to Radio.
4.
Set the Band switch to the desired frequency band (AM or FM).
5.
Adjust the Tune dial to select a radio station.
6.
Extend and adjust the antenna for best reception.
7.
Press the Record button to start recording.
8.
To stop recording, press Stop/Eject button.
Recording Bluetooth to Tape:
Press Stop/Eject to open the cassette holder.
1.
2.
Insert a blank tape and close the cassette holder.
3.
Set the Function switch to Bluetooth/USB/SD.
4.
Pair your Bluetooth device to the unit and begin playing music. See the section
Bluetooth Device
5.
Press the Record button to start recording.
6.
To stop recording, press the Stop/Eject button.
Recording from a USB Flash Drive or Micro SD Card to Tape:
Press Stop/Eject to open the cassette holder.
1.
2.
Insert a blank tape and close the cassette holder.
3.
Insert a USB Flash Drive or micro SD card into the unit.
4.
Set the Function switch to Bluetooth/USB/SD.
5.
Press the side panel Play button to begin playback.
6.
Press the Record button to start recording.
7.
To stop recording, press the Stop/Eject button.
for setup details.
Pairing a
7

Publicité

Table des Matières
loading

Table des Matières