GENERAL INSTRUCTIONS FOR THE
G
ENERAL
•
Carefully read the notes contained in this section as they provide important
information on the correct safe installation, use and maintenance of the
product.
•
The product must be EXCLUSIVELY used for the purpose it was designed
for. Esse-ti shall not be responsible for damages arising from improper use.
•
The product has been designed in compliance with the regulations in force
and must be installed in system that comply with the provisions of law.
•
Always refer to an authorised assistance centre for repair.
•
Do not use the product in association with other electric or electronic
devices that were not especially designed to be used with it.
•
Do not install the product in potentially explosive environments.
•
Make sure that the product has been installed as required.
•
Do not introduce objects, liquids or powders inside the product. Do not use
sprays inside the product.
•
Do not open the product case since it does not contain any user-serviceable
parts. If necessary, contact an authorised assistance centre.
•
In case of gas leaks in the environment do not use the telephone to make an
emergency call.
•
When replacing the batteries, arrange for suitable disposal with similar
waste.
•
Packing components (such as plastic bags, foam polystyrene, etc.) must be
kept out of the reach of children because potentially dangerous.
M
AKING THE
Internal telephone installations must be carried out by specialised personnel.
The
installation
telecommunications network that do not comply with the regulations in force is
not permitted.
52
INSTALLER
N
OTES
I
NSTALLATION
and
connection
of
telephone
GENERAL INSTRUCTIONS FOR THE INSTALLER
terminals
to
the