Boost Mode; Switch Off The Appliance - Brandt TI2010R Mode D'emploi

 Fry mode
To use this mode, press on the Fry button (4). A lamp lights up. The default power level
shall be level 6. When press "+" or "-" or slider again, the induction cooker entering the
power state.
 Boil mode
Boil mode is for boiling water. To use it, press on the Boil button (5). A lamp lights up. The
default power level shall be level 10. After about 7 minutes, it will turn to 8 level power. In
this mode, the default working time is 15 minutes.
Note: It is recommended to put water that occupies 30% to 80% of the pot capacity when
boiling water.
 Boost mode
The boost button (6) allows obtaining directly the highest power level. By pressing again the
boost button (6) the appliance will go back to the power of origin.
 Child lock mode
To lock the control pads during cooking, press on Child lock button (10). The indicator « Lo
c » will appear on the screen. In this case, only the On/Standby button (7) can be used to
switch off the appliance. To unlock the control panel, press again on "lock" button during 3
seconds.
e) Switch off the appliance
After use, the electric hob is hot, the buzzer rings and the indicator « H » flashes on the
screen. To switch off the appliance, press on the On/Standby button (7), then unplug the
socket.
Please, refer below table for wattage: